Staff Achievements

The School is proud of our staff and want to celebrate their hard work. Listed below are details of the numerous prizes and awards achieved by our staff.

National Conference
Raj Kumar ,Dr. K. Hema Chandra Reddy., Dr. G. Amarendar Rao., “An Overview of the Effects of Exhaust Gas Recirculation on the Emissions of Heavy Duty Diesel Engines.” In: Proceedings of National conference AIME-2012 at Kamala Institute of Technology & Science(KITS) , Huzurabad, 18th February 2012.

International Conference
Raj Kumar, Dr. K. Hema Chandra Reddy., Dr. G. Amarendar Rao., “An Overview on Performance and Emission Characteristics of Dual Fuel Engine.” In: Proceedings of International conference RITS ICAEM -2012 at Royal Institute of Technology & Science 28 & 29th February 2012.

International Journal:
Raj Kumar, Dr. K. Hema Chandra Reddy., Dr. G. Janardhana Raju., “Heat Transfer Analysis in the Cylinder Head of a Four Stroke S.I Engine. In: Proceedings of International Journal of Engineering Research & Technology(IJERT),ISSN:2278-0181, Vol.2 Issue 5, May – 2013.

Workshops Attended:

  • A Five Day National Workshop on “FINITE ELEMENT METHODS” at Guru Nanak Engineering College , Ibrahimpatnam, Hyderabad during 10th to 14th February 2007.
  • A Three Day National Workshop on “RECENT ADVANCES IN INTERNAL COMUSTION ENGINES” RAICE – 2008 at National Institute of Technology, Warangal, Andhra Pradesh during 28-30 March 2008.
  • A One Day Workshop on “AEROSPACE ENGINEERING” – Perspectives Organized by Acoustical Society of India – Hyderabad Chapter and Department of Aeronautical Engineering of VITAE on 21st August, 2010.
  • A Five day Mission 10X workshop conducted at Guru Nanak Engineering College at Ibrhimpatnam from 23rd May 2011 to 27th May 2011 By WIPRO.
  • A Two Week ISTE Workshop on “THERMODYNAMICS IN MECHANICAL ENGINEERING” Conducted by Indian Institute of Technology Bombay from 14th to 24th June,2011 under the National Mission on Education through ICT (MHED)
  • One day National Level Workshop on “I.C.ENGINES: ALTERNATIVE FUELS AND COMBUSTION” on 4th February 2012 Organized at Samskruti College of Engineering and Technology, Hyderabad.

  • Mr. M. Anjaiah, Assoc. Professor, Attended a “ National Workshop on “ Rapid Prototyping technologies” on 5th & 6th march 2010 at M.V.S.R Engineering college.
  • Prof. R.V. Prasad has presented a paper titled “ Solidification simulation of casting using solid computing Methodologies” in the national conferences on Soft Computing held on 19,20th March 2009 at Institute of Road & Transport Technologies Tamilnadu.
  • Ph. D received in 2011-12 : 01 ( Dr. Ratnakar Pandu)
  • Ph. Ds submitted in 2011-12 : 01 ( Prof. V. Sitaram Prasad, is in the process of submitting the thesis)
  • Faculty doing Ph.D in 2011- 12 : 02 ( Mr. A. Raj Kumar & Mr. M. Anjaiah)
  • A paper “Simulation studies on structural behavior of single wall carbon Nanotubes –using Finite element analysis technique” , published by Dr. Ratnakar Pandu in the international journal of Material Science and Research India. August 2011.
  • A Paper “Simulation studies on 13, 14 and 15 walled Carbon Nanotubes – An FE analysis”, presented by Dr. Ratnkar Pandu in the International Conference ICAM- 2011, held at PSG College – Coimbatore Dec-2011.
  • A paper “Design and development of Low-cost, Eco-Friendly Dye-sensitized Solar Photovoltaic cells”, presented by Dr. Ratnakar Pandu in the international conference on role of Green Technologies held at GNI Campus Hyderabad.
  • A Paper Published on “Performance and Evaluation of a Diesel Engine Fuelled with Filtered Pongamia Oil and its Standardization Characteristics” by Prof. V. Sitaram Prasad a International Journal of Science, Technology and Management. ISSN No. 0976-2140. Volume 2, Issue 1, April, 2011.
  • A Paper Published on “Performance of a diesel engine and its standardization characteristics” by Prof. V. Sitaram Prasad at International Conference, Technology and Management.
  • At college level the Mission 10X workshop was organized in the month of June from our Department the following faculties were attend the Programme and got certificates.
    • Prof. R. Nageswara Rao
    • Mr. M. Anjaiah
    • Mr. A. Raj Kumar
  • “A Decision Making Tool for Dynamic Scheduling of Jobshop Problem”, International Journal on Advanced computing, Vol. 2, Issue 1, Jan 2010.
  • “A Case Study on Maintenance Executive Information system in a Thermal Power Plant” Industrial Engineering Journal, Vol. XXXV NO. 1, January 2006.
  • “Designs and Development of Decision Support System for Materials Management Department in a basic supply Chain Oriented Environment- A Case Study in a Spinning Mill” Second International Conference on Logistics and Supply Chain Management a PSG College of Technology, Coimbatore 3rd –5th August, 2004.
  • “A Study on Management Information System For Selective Inventory Control in a Cement Manufacturing Unit”, National Conference on Computer Applications in Mechanical Engineering (CAME-2005),at JNTU College of Engineering, Ananthapur, 21st December 2005.
  • “Management Information System: A Vital Resource for Computer Integrated Manufacturing” National seminar on Recent Trends in Production and Industrial Engineering, GPR college of Engineering, Kurnool, 09th December 2002.
  • “Applications of Simulation in Manufacturing and Materials handling system design and optimization”, National Conference on advanced Trends in Mechanical Engineering and Research and Development at JNTU College of Engineering, Anantapur. 21st December 2002.
  • “Operations Research Modeling applications in manufacturing and Service organization A Review”, National Conference on advanced Trends in Mechanical Engineering and Research and Development at JNTU College of Engineering, Anantapur. 21st December 2002.
  • “A Review of Machatronics applications in Robotics and Computer Aided Manufacturing Systems”, National seminar on Recent Trends in Production and Industrial Engineering, GPR college of Engineering, Kurnool, 09th December 2002
  • “Development of Management Information system for stores management in a Thermal power plant-A case study”, International conference GMI-2006, July 27-29,2006, CIT, Coimbatore-34.
  • “Decision Support System for Job Shop Scheduling”, International Conference on advanced Computing Technologies, Dec. 26-27, 2008 ,GRIET, Hyderabad-90
  • A Review on Multi Objective Scheduling by Genetic Algorithms, Fuzzy Logic and Neural Networks”, International Conference on Advances in Industrial Engineering Applications (ICAIEA - 2010), Jan 6- 8, 2010, organized by Department of Industrial Engineering , Anna University Chennai .
  • Submitted proposal to the AICTE under RPS titled CONTROL SYSTEMS FOR THE BRUSHLESS DC MOTORS & E-BICYCLES / E-BIKES as Co-Principal investigator where the Principal investigator is Dr. Raj Kamal (VC of Devi Ahalya University Indore). Dean R & D of GNEC and it is approved.
  • Conducted a National level workshop HOW TO MAKE A ROBOT IN A DAY on 31st Jan 08, TECHNOFEST (Paper Presentation) - 07 on 13th Oct 07 & INNOVATIONS (Project Presentations) – 08 on 1st Mar 08, under Dept. of Mech. Engg.
  • Mr. Taher ali Syed Publications in International Journal/Conferences
    • Design analysis of Propeller shaft. By using Kevlar/Epoxy composite in www.ijmer.com. Vol.2, Issue.4, July-Aug. 2012 pp-1557-1563. ISSN: 2249-6645 www.ijmer.com. 1557 | Page. Thahar Ali Syed. 1*. Adnan Javed.2.
    • . Design and Development of ZNO Nanotube Based Photo-Electrodes for Dye-Sensitized Solar Cells IJSRP, Volume 2, Issue 5, May 2012 Edition [ISSN 2250-3153] Thahar Ali Syed, 1*. , Eswara Prasad k
    • Attended the conference and presented a paper at the “International conference on “Role of Green Technologies for Sustainable Development” at GNITC march2011 Hyderabad India
  • Mr. T. Murali Mohan Raju International Journals in the Year 2012-13 on the topic “ Thermal Design & Analysis of Electronic Enclosure of Ground Radar” and “Vibration Reduction in Aerospace Bracket Through Structural Design”
  • Professor Ratnakar Pandu was awarded with Ph D in by JNTU in April, 2012

Faculty Publications

  • Dr. G Amarendra Rao has published a paper on “Effect of LPG content on the performance & Emission on the duel fuel engine” in the International Journals BJISR in March 2011
  • Prof. Sitaram Prasad has Published a paper on “Performance and Evaluation of a Diesel Engine Fuelled with Filtered Pongamia Oil and its Standardization Characteristics” International Journal of Science, Technology and Management (ISSN No. 0976-2140) Volume 2, Issue 1, April, 2011
  • Dr. G Amarendra Rao has published a paper on “Effect of Injection pressure on the performance & Emission on the duel fuel engine” in the International journal of Scientific computing –Chennai in March 2011
  • Mr. Rajkumar A, Assoc. Prof. has Published a paper on “An Overview of the effects of exhaust gas recirculation on the emission of Heavy duty Diesel Engines” in the proceedings of National conference (AIME-2012) organized by KITS, Huzurabad on 18th Feb’2012
  • Mr. Shanmukha Prasad V, Assoc. Prof has Published a paper on “Heat & Mass Transfer through a porous medium in a vertical wavy channel with travelling thermal wave” in the proceedings of National conference (AIME-2012) organized by KITS, Huzurabad on 18th Feb’2012
  • Mr. Rajkumar A, Assoc. Prof. has Published a paper on “An Overview on Performance & Emission Characteristics of a Duel fuel engine” in the proceedings of International conference (RITS-2012) organized by RITS, Hyderabad on 28th & 29th of Feb’2012
  • Mr. Shanmukha Prasad V, Assoc. Prof has Published a paper on “Heat & Mass Transfer in a vertical wavy channel with travelling thermal waves & Heat sources” in the proceedings of National conference (AIME-2012) organized by KITS, Huzurabad on 16th March 2012
  • Dr. Ratnakar Pandu has published a paper on “Design and Development of Low- Cost, Eco- Friendly Dye- Sensitized Solar Photovoltaic Cells” in the proceedings of International conference (RITS-2012) organized by RITS, Hyderabad on 30th & 31th of March 2012
  • Dr. Ratnakar Pandu has published a paper on “Design & Development of ZNO Nanotube based photo electrodes for die sensitized solar Cells” in the proceedings of International conference (RITS-2012) organized by RITS, Hyderabad on 30th & 31th of March 2012
  • Prof. Ratnakar Pandu has published a paper on “Design & Development of ZNO Nanotube based photo electrodes for die sensitized solar Cells” in the proceedings of International conference (RITS-2012) organized by RITS, Hyderabad on 30th & 31th of March 2012